{"product_id":"3d-printed-lamp-file-download-kopie","title":"lampshade large 3d print file downloads","description":"\u003cp\u003eImportant notice: This is not a physical product. you are purchasing the digital download files only, allowing you to print the lamp yourself on your 3d printer. \u003c\/p\u003e\n\u003cp\u003eBuild size: height 18,5 diameter 31,5 cm \u003c\/p\u003e\n\u003cp\u003eThere's two files, one is a lampshade designed to fit a standard e27 fitting, so you can place the shade on any cable operated table lamp. The other file is the lampshade designed for rechargeable puc lights, so this one does not have the e27 hole in the bottom.\u003c\/p\u003e\n\u003cp\u003eImportant notice! \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly use LED light bulbs with this shade, do not use light bulbs that will heat up over time! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eyou will need one wireless magnetic puc light per lamp.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e if you want the shades to be magnetic: four neodymium magnets (10 x 2mm) per lamp. \u003c\/p\u003e\n\u003cp\u003ethese are the ones I used:\u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 12px; flex-wrap: wrap; margin: 16px 0;\"\u003e\n\u003ca href=\"https:\/\/amzn.to\/4ewnxUr\" rel=\"noopener noreferrer sponsored\" style=\"display: inline-block; background-color: #ff9900; color: #000000; font-weight: bold; padding: 12px 24px; border-radius: 4px; text-decoration: none; font-family: Arial, sans-serif; font-size: 14px;\" target=\"_blank\"\u003e Amazon \u003c\/a\u003e \u003ca href=\"https:\/\/amzn.to\/4xIkam7\" rel=\"noopener noreferrer sponsored\" style=\"display: inline-block; background-color: #ff9900; color: #000000; font-weight: bold; padding: 12px 24px; border-radius: 4px; text-decoration: none; font-family: Arial, sans-serif; font-size: 14px;\" target=\"_blank\"\u003e Amazon \u003c\/a\u003e\n\u003c\/div\u003e\n\u003ch6\u003e(affiliate link, feel free to purchase what ever you feel works for you)\u003c\/h6\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGlue the metal sheet that comes with the puc light onto the middle bar of the lamps foot (inside of the lamp shade). The lamp will be securely in place, but is really easy to remove for charging. The neodymium magnets go into the little crevices Wich are positioned just at the end of the middle bar (also inside of the shade). Place a small amount of glue Ito the crevice and slide the magnet in. For extra strong hold you can put 4 magnets per lamp. \u003c\/p\u003e\n\u003cp\u003eIf you want the lamp to be hung up, make a tiny little hole just right at the tip and draw a translucent string through the hole. knot it inside of the shade, so the knot stops the shade from slipping back down. Use it with a puc light, to have the illusion of a floating light. \u003c\/p\u003e\n\u003cp\u003eIf you want the lamps to be stackable into a diamond shape, make sure the magnets are placed to attract each other, if the lamps are stacked. easy tip is: glue one magnet into a lamp and place the other magnet on top, colour the side of the magnet that's facing towards you with a sharpie, the side that’s not coloured has to be facing down into the little slot. Put a little amount of glue on the non coloured side and plop into into the hole. This way you make sure the attracted sides are both facing towards each other once the lamps are stacked. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0980\/1957\/4106\/files\/IMG_3992.jpg?v=1782029389\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e Print Settings:\u003cbr\u003e Layer height: 0.3 mm\u003cbr\u003e Infill: 15–20%\u003cbr\u003e No supports required \u003cbr\u003e PETG, PLA recommended\u003cbr\u003e Vase mode (Spiralize outer contour)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTerms of Use \/ License Agreement:\u003cbr\u003eBy purchasing this digital file (STL), you are granted a license for personal, non-commercial use only.\u003cbr\u003e•⁠  ⁠No Commercial Selling: You are strictly prohibited from selling, renting, or commercially distributing the physically printed objects.\u003cbr\u003e•⁠  ⁠No File Sharing: You may not share, resell, modify, or sub-license the digital files, or upload them to any public platform.\u003cbr\u003eIf you wish to sell physical prints of this design commercially, please contact me regarding a commercial license\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"allthepeachesplease","offers":[{"title":"Default Title","offer_id":54492929294682,"sku":null,"price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1957\/4106\/files\/IMG_7539.jpg?v=1785659021","url":"https:\/\/www.allthepeachesplease.com\/products\/3d-printed-lamp-file-download-kopie","provider":"allthepeachesplease","version":"1.0","type":"link"}