3d printed lamp file download

Important notice: This is not a physical product. you are purchasing the digital download files only, allowing you to print the lamp yourself on your 3d printer. 

The lamp shades are magnetic and will hold on any magnetic surfaces, as well as you can just hang them onto a nail or screw with the built in mounting slit. To recharge just pop the magnetic puc lights out from the middle slits. 

you will need one wireless magnetic puc light per lamp and two neodymium magnets (10 x 2mm) per lamp. 

these are the ones I used:

https://amzn.to/4ewnxUr

https://amzn.to/4xIkam7 

Glue the metal strip for the puc light onto the middle bar of the lamps foot (inside of the lamp shade). The lamp will be securely in place, but is really easy to remove for charging. The neodymium magnets go into the little crevices that are just at the end of the middle bar (also inside of the shade) Place a small amount of glue on the magnet and slide it into the crevice. for extra strong hold you can put 4 magnets per lamp. 

If you want the lamps to be stackable into a diamond shape, make sure the magnets are placed to attract each other if the lamps are stacked. easy tip is. glue one magnet into a lamp and place the other magnet on top colour the side of the magnet that's facing towards you with a sharpie, this is the side the glue has to go on for the second lamp. this way you make sure the attracted sides are both facing towards each other once the lamps are stacked. 

 Print Settings:
 Layer height: 0.3 mm
 Infill: 15–20%
 No supports required (oder: No support needed)
 PETG, PLA recommended
 Vase mode (oder: Spiralize outer contour)

Terms of Use / License Agreement:
By purchasing this digital file (STL), you are granted a license for personal, non-commercial use only.
•⁠  ⁠No Commercial Selling: You are strictly prohibited from selling, renting, or commercially distributing the physically printed objects.
•⁠  ⁠No File Sharing: You may not share, resell, modify, or sub-license the digital files, or upload them to any public platform.
If you wish to sell physical prints of this design commercially, please contact me regarding a commercial license